BorisS
Drone Enthusiast
HI Guys,
I am having less and less time and space for my hobby so one of my bigger frames has to go. Picked the CS since its taking up the most space and I am happy with the GH2 as my primary camera so
my S800 is enough for the job.
Build thread: http://www.multirotorforums.com/showthread.php?1067-CS-8-WKM-Herkules-II-Build
So what i am selling:
CS 8 frame:
= 1350 Euro
QCs x 8 3328 a 30 Euro
= 240
Motors have been used for several hours. They are still in good shape !
CS gimbal 2 Axis, Savöx servos on it now, but additiotal 2 Freefly servos that were never used and Kopterworx Anti-vibration adapter: http://www.kopterworx.com/Accesories-Cinemastar/CS-antivibration-adapter
= 850 Euro
So Altogether inkl. shipment 2440 Euro.
Serveral different props also available 13 6.5 CF and 12 x 2.8 CF, APC etc.
I am not selling any separate parts only all the mentioned parts together. Additional parts in the Fotos are not for sail. I don't want to sell the whole setup RTF with WKM and the Herkules ESCs. Herkules ESCs i want to keep and selling a RTF setup is just to
much responsibility since i don't have to the time to give support and deal with any issues that can always happen with an RTF setup.
Thanks
Boris
View attachment 5946View attachment 5943View attachment 5945View attachment 5944
I am having less and less time and space for my hobby so one of my bigger frames has to go. Picked the CS since its taking up the most space and I am happy with the GH2 as my primary camera so
my S800 is enough for the job.
Build thread: http://www.multirotorforums.com/showthread.php?1067-CS-8-WKM-Herkules-II-Build
So what i am selling:
CS 8 frame:
| 2pcs. Center hub (press nuts installed) 6pcs. Landing gear assembly (press nuts installed) 1pcs. Lipo battery tray 1pc. Camera mount attachment plate 8pcs. Motor mount plates (press nuts installed) 16pcs. "Dog bone" motor mount washers 2pcs. "Dog bone" GPS mount washers - Have to check it i still got those ! 12pcs. Cut carbon fiber for Vibration dampening brackets 12pcs. Silicone dampeners 60 M3x6mm pan head screws 8 M3x8mm pan head screws 84 M3x40mm button head screws 4 50mm Hexa stand off bolts 82 Frame clamps 8 450mm Carbon fiber booms |
= 1350 Euro
QCs x 8 3328 a 30 Euro
= 240
Motors have been used for several hours. They are still in good shape !
CS gimbal 2 Axis, Savöx servos on it now, but additiotal 2 Freefly servos that were never used and Kopterworx Anti-vibration adapter: http://www.kopterworx.com/Accesories-Cinemastar/CS-antivibration-adapter
= 850 Euro
So Altogether inkl. shipment 2440 Euro.
Serveral different props also available 13 6.5 CF and 12 x 2.8 CF, APC etc.
I am not selling any separate parts only all the mentioned parts together. Additional parts in the Fotos are not for sail. I don't want to sell the whole setup RTF with WKM and the Herkules ESCs. Herkules ESCs i want to keep and selling a RTF setup is just to
much responsibility since i don't have to the time to give support and deal with any issues that can always happen with an RTF setup.
Thanks
Boris
View attachment 5946View attachment 5943View attachment 5945View attachment 5944
reserved for Rsun till next week Wednesday !
