matthew.wright5
Member
DROIDWORX CX-4 SOLD SOLD SOLD SOLD!
Specs:
Frame: Latest model Droidworx CX-4
Motors: AXI 2814/22 Droidworx Ed.
ESC: Herkules V4 + cooling plate
Flight Controller: DJI Wookong M - latest firmware
Props: XOAR 12x4.5" CF Precision Pair (6 props included, 2 for use as spares)
Gimbals: Photohigher CX-1 (belt drive) and CX-3 Belt drive.
Modifications:
Shortened CX-4 landing gear for much improved stability on landing.
Painted Landing gear bracket from annodised orange to matt black to match colour scheme.
Painted Lexan body Pearl White.
Small holes inserted to upper body cover to allow GPS to pass through onto arm.
Used some CX-4 spares to build GPS bracket.
CX-1 Gimbal leads shortened and wire mesh attached for protection.
Custom flight controller stack.
Performance:
Herkules with cooling plate easily manages flight after flight without issue. extremely powerful.
Using 4S 6000Mah packs and getting 15-18 min flight time with a healthy reserve. Herkules capable of 6S flight.
Achieved solid locks for GPS mode within 30 sec - cold start.
Reason for selling: I have finally identified that I enjoy building more than flying. I have had about 20 flights of 10 minutes on this bird, and they have all been really good. She has been a head turner down at the local park, especially with FPV gear attached. If I had the money I would keep it, but I want to keep building.
Price: $3000 AUD, Shipping costs extra.
CX-4 will be shipped PNP.
CX-4 will ship without stickers on the body, unless the buyer wants them to remain.
Thanks for looking
View attachment 4053View attachment 4054View attachment 4055View attachment 4056View attachment 4057View attachment 4058View attachment 4059View attachment 4060
Specs:
Frame: Latest model Droidworx CX-4
Motors: AXI 2814/22 Droidworx Ed.
ESC: Herkules V4 + cooling plate
Flight Controller: DJI Wookong M - latest firmware
Props: XOAR 12x4.5" CF Precision Pair (6 props included, 2 for use as spares)
Gimbals: Photohigher CX-1 (belt drive) and CX-3 Belt drive.
Modifications:
Shortened CX-4 landing gear for much improved stability on landing.
Painted Landing gear bracket from annodised orange to matt black to match colour scheme.
Painted Lexan body Pearl White.
Small holes inserted to upper body cover to allow GPS to pass through onto arm.
Used some CX-4 spares to build GPS bracket.
CX-1 Gimbal leads shortened and wire mesh attached for protection.
Custom flight controller stack.
Performance:
Herkules with cooling plate easily manages flight after flight without issue. extremely powerful.
Using 4S 6000Mah packs and getting 15-18 min flight time with a healthy reserve. Herkules capable of 6S flight.
Achieved solid locks for GPS mode within 30 sec - cold start.
Reason for selling: I have finally identified that I enjoy building more than flying. I have had about 20 flights of 10 minutes on this bird, and they have all been really good. She has been a head turner down at the local park, especially with FPV gear attached. If I had the money I would keep it, but I want to keep building.
Price: $3000 AUD, Shipping costs extra.
CX-4 will be shipped PNP.
CX-4 will ship without stickers on the body, unless the buyer wants them to remain.
Thanks for looking
View attachment 4053View attachment 4054View attachment 4055View attachment 4056View attachment 4057View attachment 4058View attachment 4059View attachment 4060
Attachments
Last edited by a moderator: