We have some problem with our DJI WOOKONG WK .There is no problem flying without payload.It is stabile byits own.After loading 1 kgcamera ;after pushing the throttle more than center position motor no 1increasing by itself.Than it is stopping and also it is tumbling to the frontside.
We set up the esc. batteryand motor out of DJI.We gave maximum power to the throttle.Motor didn’t stop.Itwork properly without problem. We put the proppeller only M2 but the sameproblem occured and motor stopped.We are sure that there is no problem with escand motor.Even we suspected about the motor and esc we ordered new esc andmotor.But the same problem continued.There is no problem until giving ¾ powerbut when giving power more than ¾ motor stopped and thumbled.
We had no problem withoutpayload as you know we don’t need more than ¾ power without payload.But afterloading camera and cam. mount as I told you after ¾ motor number 1 has stoppedand thumbled.So we tested M1 motor by itself setting the proppeller on theground but motor stopped after ¾ power again.Also we tested M2 motor on thesame way the same problem occured. So as you realized there is no problem withesc or motor we tested them many times.
Could you please give ananswer about the problem.
So what do you offer?
We set up the esc. batteryand motor out of DJI.We gave maximum power to the throttle.Motor didn’t stop.Itwork properly without problem. We put the proppeller only M2 but the sameproblem occured and motor stopped.We are sure that there is no problem with escand motor.Even we suspected about the motor and esc we ordered new esc andmotor.But the same problem continued.There is no problem until giving ¾ powerbut when giving power more than ¾ motor stopped and thumbled.
We had no problem withoutpayload as you know we don’t need more than ¾ power without payload.But afterloading camera and cam. mount as I told you after ¾ motor number 1 has stoppedand thumbled.So we tested M1 motor by itself setting the proppeller on theground but motor stopped after ¾ power again.Also we tested M2 motor on thesame way the same problem occured. So as you realized there is no problem withesc or motor we tested them many times.
Could you please give ananswer about the problem.
So what do you offer?