First build tell me what you think

[forsberg2111]

Hey guys im a new member here and im planning on building my first quadcopter..

here is my part list

FrameTurnigy H.A.L. (Heavy Aerial Lift) Quadcopter Frame 585mm
https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=22732

Flight ControllerMultiWii PRO Flight Controller w/MTK GPS Module
https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=26588

Flight controller case Case Set For MultiWii PRO Flight Controller And MTK GPS Module
https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=51454

Motors NTM Prop Drive 28-30S 800KV / 300W Brushless Motor (short shaft version)
https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=43369

Motor Accessory
https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=24527

ESC Afro ESC 30Amp Multi-rotor Motor Speed Controller
https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=39708

Power Distribution Board
https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=23140

Battery Plate
https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=25438

https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=39437

What do you guys think so far? Am i missing anything?

I dont know whats the best battery or props for this build, can i get any suggestions

I just want to be able to attach a Contour Roam camera to it and make videos, then in the future add FPV


Thanks for the help

 

[wolph42]

Erm: props?

 

[forsberg2111]

Erm: props?

Yah sorry I ment to write what's the best props and battery for this setup. Thanks

 

[wolph42]

To get an indication check out my tool, link in sig. After that put it in ecalc.

 

[forsberg2111]

To get an indication check out my tool, link in sig. After that put it in ecalc.

Thanks for the reply, I just took a quick look at your link, it very nice but I was wondering wouldnt the weight of the frame have anything to do with the motor, prop and battery selection. Sorry for the newbie questions.

 

[wolph42]

Obviously it does. That's where ecalc comes into play. My tool only helps newbies make basic choices and get them aligned. Ecalc can actually calculate the result.