Captain Kangaroo
Member
Hi,
I'm having video issues with a new Z15-GH3 setup. I've soldered the yellow video and ground cables which plug into my immersionRC transmitter and the single red power lead which plugs into the left port on the transmitter as per the manual.
the issue is i either get no video picture (I'm getting signal from the transmitter as when i turn off the camera the screen goes static) or if i do get a picture its really poor quality and not anything that you can work with!
So just to confirm the yellow and black wires are plugged into the right port on the immersion and the red on the left. There is no negative -
Does anyone have any ideas what the issue could be?
Thanks
I'm having video issues with a new Z15-GH3 setup. I've soldered the yellow video and ground cables which plug into my immersionRC transmitter and the single red power lead which plugs into the left port on the transmitter as per the manual.
the issue is i either get no video picture (I'm getting signal from the transmitter as when i turn off the camera the screen goes static) or if i do get a picture its really poor quality and not anything that you can work with!
So just to confirm the yellow and black wires are plugged into the right port on the immersion and the red on the left. There is no negative -
Does anyone have any ideas what the issue could be?
Thanks