TS-352 Transmitter & DJI iOSD Mini connection help....

[oldman]

i bought a Boscam video monitor and transmitter.....got it hooked up and everything works fine...i just bought an iOSD Mini and cant figure out how to get it connected.....the yellow and black are going to the GoPro.....the black and red are going to the brown and red coming out of the P2..... the iOSD mini .... the yellow and brown go to the P2.....where do the orange and brown go?...thank you.....sorry for all the ....... but this fourm doesnt paragraph for me and it was all jumbled.

 

[Tahoe Ed]

You got a quick wiring diagram on that. It is hard to visualize what you are trying to do. I assume that you are hard mounting the GoPro and using the USB output. Are you connecting the iOSD mini to the Can Bus?

 

[blade strike]

Orange to yellow and brown to black. Do not touch power side.

regarding the forum issue, run in compatibility mode or use chrom.

 

[oldman]

thanks you all. it doesnt work. i tried tapping in to the GoPro with the brown and red. The iOSD shows up now, but all over the screen and the monitor is all static now. before i tried that, the monitor worked perfect. ive tried so many wiring combinations to make this thing work. i surrender.... thanks again you all.

 

[Tahoe Ed]

Ok, go back to my request from another old man. We need to see the details or we cannot help you. Blade may have been close but unless we can see your wiring we are lost.