fleishyphoto
New Member
For sale is a ready to fly Cinestar 8 with 360 Radian Gimbal. This is a complete setup. Everything included except camera, to start flying/shooting same day. You will not need to buy any other equipment. The Cinestar 8 is one (1) year old and has never been crashed or had a hard landing. Origionally purchased from Quadrocopter. I am selling all my RC gear to focus more on my still photography business.
Here is what is included:
Multirotor/electronics
-Fully Assembled and configured CineStar 8
-All MikroKopter components, Flightctrl, nav, and GPS way point flying
-3DR wireless Telementry installed (for use in wireless connection to the laptop)
-CineStar build guide DVD (great watch to familiarize yourself with the components and operation)
-Acer Laptop with all Mikrokopter and Radian software preloaded and ready to use
-Sony LANC-Ctrl (used for zoom in and out and start and stop record) Works great for Sony FS700 and FS100 as well
-Aero Sim RC flight simulator for PC (connect Graupner mx-20 directly to pc to use with flight simulator)
-preflight checklist
Remote control Transmitters
-Graupner MX 20 radio with MK Telemetry
-Graupner competition tray with strap
-Graupner transmitter Lipo battery upgrade (transmitter can run for days without the need to charge)
-Spectrum DX6i radio for camera operator
Motors/Props/Speedcontrollers
-QuadroPower QC 3328 Motors
-one (1) spare QC 3328 motor new in box
-six (6) extra propeller blades never used
-ESC heat sink coolers installed (helps keep the speed controller temps lower)
gimbal
-3-Axis dual operator Radian / 360 degree Freefly camera gimbal (this gimbal can handle any camera on the market)
-Freefly HDMI converter installed (includes 2 hdmi cables, VERY HARD TO FIND)
-Spectrum Diversity receiver with satellite (installed on camera gimbal to allow connectivity to Camera operators Radio)
-Spare Spektrum AR 7010 Reciever
-Canon shutter release cable
-Panasonic shutter release cable
-Spare RC shutter cables
-Dual adjustable tilt bars (not installed new in box)
-quick relase camera plate as well as original cinestar camera mount
-misc. cinestar hardware (screws, boom clamps, carbon fiber tube)
-red and blue vibration dampener O-rings (used to change stiffness on gimbal mount for different camera weights)
-misc. servo wires and accessories
-Installed 12 to 5v Stepdown for Radians (its hidden in the booms but allows for clean 5V power for the gimbal receivers and Radians)
FPV system
-Mondo Stinger 500mill watts video transmitter installed for camera operator view with IB Crazy mad mushroom antenna for optimum performance
-Passport Diversity 5.8 receiver for video with IB Crazy antennas (plus 3 spare antennas)
-Readymade RC 10.1” FPV monitor (includes remote control, hood, power cable, video cable, cable to power monitor from 3s lipo)
-Lawmate 1.2 Ghz Transmitter and Reciever for Pilot Camera view (not installed on copter, as I never used a two camera operation, but I will include the transmitter and receiver if you wish to hook it up)
-Sony High Resolution FPV Camera for Pilot (in the box, never installed, as I didn't use two cameras)
-GoPro ifton video cable to plug directly into Mondo Stinger Transmitter (in box, never used)
Charger/Batteries
-Revolectrix cellpro powerlab 8 charger 1344 watts 40amp max with balance board to charge up to 6 Lipo batteries at once (this is the best charger on the market)
-24 volt power supply for charger
-Five (5) 8000mAh 4s Lipo Battery Zippy brand
-one (1) 10900mAh 4s maxamps battery true 120c
-one (1) 8000mAh 4s Quadropower
-four(4) 2200mAh 3s lipo battery (used to power gimbal, fpv transmitter, HDMI Converter)
-two (2) voltage warning testers
-two (2) EC5 parralel cables to run multiple batteries at once
-All equipment included currently retails for $17,500 new. My selling price is $12,000.
-Pickup in person (Dallas TX) includes an optional 2 days of training.
email: sam@fleishmanphotography.com
phone: 214-394-3501
Here is what is included:
Multirotor/electronics
-Fully Assembled and configured CineStar 8
-All MikroKopter components, Flightctrl, nav, and GPS way point flying
-3DR wireless Telementry installed (for use in wireless connection to the laptop)
-CineStar build guide DVD (great watch to familiarize yourself with the components and operation)
-Acer Laptop with all Mikrokopter and Radian software preloaded and ready to use
-Sony LANC-Ctrl (used for zoom in and out and start and stop record) Works great for Sony FS700 and FS100 as well
-Aero Sim RC flight simulator for PC (connect Graupner mx-20 directly to pc to use with flight simulator)
-preflight checklist
Remote control Transmitters
-Graupner MX 20 radio with MK Telemetry
-Graupner competition tray with strap
-Graupner transmitter Lipo battery upgrade (transmitter can run for days without the need to charge)
-Spectrum DX6i radio for camera operator
Motors/Props/Speedcontrollers
-QuadroPower QC 3328 Motors
-one (1) spare QC 3328 motor new in box
-six (6) extra propeller blades never used
-ESC heat sink coolers installed (helps keep the speed controller temps lower)
gimbal
-3-Axis dual operator Radian / 360 degree Freefly camera gimbal (this gimbal can handle any camera on the market)
-Freefly HDMI converter installed (includes 2 hdmi cables, VERY HARD TO FIND)
-Spectrum Diversity receiver with satellite (installed on camera gimbal to allow connectivity to Camera operators Radio)
-Spare Spektrum AR 7010 Reciever
-Canon shutter release cable
-Panasonic shutter release cable
-Spare RC shutter cables
-Dual adjustable tilt bars (not installed new in box)
-quick relase camera plate as well as original cinestar camera mount
-misc. cinestar hardware (screws, boom clamps, carbon fiber tube)
-red and blue vibration dampener O-rings (used to change stiffness on gimbal mount for different camera weights)
-misc. servo wires and accessories
-Installed 12 to 5v Stepdown for Radians (its hidden in the booms but allows for clean 5V power for the gimbal receivers and Radians)
FPV system
-Mondo Stinger 500mill watts video transmitter installed for camera operator view with IB Crazy mad mushroom antenna for optimum performance
-Passport Diversity 5.8 receiver for video with IB Crazy antennas (plus 3 spare antennas)
-Readymade RC 10.1” FPV monitor (includes remote control, hood, power cable, video cable, cable to power monitor from 3s lipo)
-Lawmate 1.2 Ghz Transmitter and Reciever for Pilot Camera view (not installed on copter, as I never used a two camera operation, but I will include the transmitter and receiver if you wish to hook it up)
-Sony High Resolution FPV Camera for Pilot (in the box, never installed, as I didn't use two cameras)
-GoPro ifton video cable to plug directly into Mondo Stinger Transmitter (in box, never used)
Charger/Batteries
-Revolectrix cellpro powerlab 8 charger 1344 watts 40amp max with balance board to charge up to 6 Lipo batteries at once (this is the best charger on the market)
-24 volt power supply for charger
-Five (5) 8000mAh 4s Lipo Battery Zippy brand
-one (1) 10900mAh 4s maxamps battery true 120c
-one (1) 8000mAh 4s Quadropower
-four(4) 2200mAh 3s lipo battery (used to power gimbal, fpv transmitter, HDMI Converter)
-two (2) voltage warning testers
-two (2) EC5 parralel cables to run multiple batteries at once
-All equipment included currently retails for $17,500 new. My selling price is $12,000.
-Pickup in person (Dallas TX) includes an optional 2 days of training.
email: sam@fleishmanphotography.com
phone: 214-394-3501
Attachments
-
image (2).jpg -
image (3).jpg -
image (4).jpg -
image (5).jpg -
image (6).jpg -
image (7).jpg -
image (8).jpg -
image (9).jpg -
image (10).jpg -
image (11).jpg -
image (12).jpg -
image (13).jpg -
image (14).jpg -
image (15).jpg -
image (16).jpg -
image (17).jpg -
image (18).jpg -
image (19).jpg -
image (20).jpg -
image (21).jpg -
image (22).jpg -
image (23).jpg -
image (24).jpg -
image (25).jpg -
image (26).jpg -
image (27).jpg -
image (28).jpg -
image (29).jpg -
image.jpg