Hi I got DJI WKM v1 and I just bought a IOSD mark2 http://www.dji.com/product/iosd-mark-ii/ for data link and Bluetooth and data link should I buy this V2 Bluetooth http://www.dji.com/wkm-firmware-and-led-bluetooth-indicator/ or I should get this package http://bradatech.com/xPedRobo/shop/index.php?main_page=product_info&cPath=5&products_id=273 but in DJI site theydid not say anything if the mini Bluetooth will work with IOSD V2 and I did not find any one selling the new 2.4 data link with out the mini Bluetooth ? please let me know thanks
Need data link and blue tooth for DJI WKM I got IOSD V2
- Thread starter john420
- Start date
soler
Member
These are two different products.
the V2 Bluetooth LED os so that you can adjust the parameters of the FC without connecting a PC, you can now dow this from an iphone
The package that you refer to is to control the multi rotor for a ground station, either a PC or a iPad.
The bluetooth data link for each is different. i.e the bluetooth LED cannot be used with the 2.4ghz data link.
It all depends on what you want to do, control the craft with the ipad and set up routes and way points or configure the WKM parameters via a iPhone
the V2 Bluetooth LED os so that you can adjust the parameters of the FC without connecting a PC, you can now dow this from an iphone
The package that you refer to is to control the multi rotor for a ground station, either a PC or a iPad.
The bluetooth data link for each is different. i.e the bluetooth LED cannot be used with the 2.4ghz data link.
It all depends on what you want to do, control the craft with the ipad and set up routes and way points or configure the WKM parameters via a iPhone
Thanks Bro controling the craft with the ipad and set up routes and way points don ot need the WKM Parameter since once it adjusted in my pc software i do not want to do any thing but how about IOSD mark 2 is that gonna work with the 2.4g and the mini Bluetooth one I guess DJI has no software for android one yet
Last edited by a moderator: