Hello all,
Firstly: after my previous bad experience with octacopter and my fault choose of AXI 2826/12 i decide to go to have KW10 v2 or T-Motor MN4014/9 to build octacopter that can carry 25 KGs the whole payload so i review this 2 motors and i confuse about witch one i must to have the pros and cons for are:
<tbody>
</tbody>
So can anyone advice me about witch one is best for me how tried them.
Secondly: i plan to use Herkules III board is it good for my situation (payload about 25 KGs) and if that can any one give me a link where can i buy it, or if not advise me with the ESC i must to buy
Thirdly: i plan to use Ardupilot with this multirotor is it good for my situation.
Fourthly: for T-Motor MN4014/9 if i use Lipo batteries 6S, 8000 mah, every motor in max thrust need 26.4A, for 8 motors they need about 212 A
that's mean every Lipo 6S , 8000 mah battery can fly for about 2 minutes with max thrust is it right this calculation?????
and for Kw10 v2 can anyone give me the equation for please
I will strongly appreciate help.
Firstly: after my previous bad experience with octacopter and my fault choose of AXI 2826/12 i decide to go to have KW10 v2 or T-Motor MN4014/9 to build octacopter that can carry 25 KGs the whole payload so i review this 2 motors and i confuse about witch one i must to have the pros and cons for are:
Kw10 v2 | T-Motor MN4014/9 | |
battery | 5-6 S | 4-8 S |
Continuous Current | 20A (need less) | 30A (need more) |
Maximum Load Current | 30A for 180 Sec, 50A for 15 Sec | |
No - Load Speed | 500 RPM/V (Faster) | 400 RPM/V (Slower) |
Mechanical Power | 700-750 W (Less Power) | 900 W (More Power) |
Thrust Max. | 3300 g (Little more thrust) | 3200g |
Weight | 187 g (more weight) | 150 g |
Price | 155 USD | 140 USD |
I don't care about price. | I don't Care about price |
<tbody>
</tbody>
So can anyone advice me about witch one is best for me how tried them.
Secondly: i plan to use Herkules III board is it good for my situation (payload about 25 KGs) and if that can any one give me a link where can i buy it, or if not advise me with the ESC i must to buy
Thirdly: i plan to use Ardupilot with this multirotor is it good for my situation.
Fourthly: for T-Motor MN4014/9 if i use Lipo batteries 6S, 8000 mah, every motor in max thrust need 26.4A, for 8 motors they need about 212 A
that's mean every Lipo 6S , 8000 mah battery can fly for about 2 minutes with max thrust is it right this calculation?????
and for Kw10 v2 can anyone give me the equation for please
I will strongly appreciate help.