Hoverfly CC Phoenix 35 with HF SPORT?

[Cloud Level Media]

Having some issues getting the HF sport to run with these ESC's

CC Phoenix 35
HF sport.


I have reflashed with 4.02 firmware
and set parameters per HF recommendations.
Done Throttle endpoints.

ESC's beep once then just keep flashing.
Anyone had success with these ESC's?

cheers
Mike

 

[Aerovideo]

Sorry I don't have an answer for you but I have to admit I got all excited when you said you reflashed with 4.02 firmware. I thought you meant you flashed 4.02 Hoverfly firmware to your sport board. Finally a new firmware but alas 3.17 is all that is available for the sport board. You must have been referring to the firmware of the CC ESCs?

Sorry, I'm not much help

P.S. if you were talking about the HF Sport, where did you get the firmware for it?

 

[Cloud Level Media]

copy that Aero. 4.02 on CC ESC's Not for the HF sport board. I guess I will have to swap the ESC's to the HFP and see if I can get it to work there.

 

[yeehaanow]

I have the ice 50's. One thing different with the sport that I had trouble with at first was that the gain switch was reversed compared to the HFP.
If that's not it, maybe you need to lower your throttle endpoints.
As long as the castle has the multirotor option in the setup, they should work great. I'm looking for something like those ESC's too so I hope it works.