Savox - AV 130 Pan Servo

[DIPswitch]

I have a twitchy Hyperion pan servo.
There is word of a Savox 360 servo that fits . Any one with any info on that ?

or any luck with any pan servos for the 130.

Thanks

 

[tombrown1]

I use a freefly servo. Great upgrade. It takes a bit of doing to get it on, but it works great.

 

[DIPswitch]

are you running that servo on a RSGS unit ?

thanks

 

[tombrown1]

I only use RSGS on my tilt, and tilt isn't very important to me because a Sony BOSS camcorder. I don't think too highly of RSGS - and pan on RSGS was nothing short of a nightmare - even with a Freefly Servo. Our pan is all manual. I don't really see the benefit of having pan stabilization honestly - never have.

Best,


Tom

 

[DIPswitch]

Thanks Tom,
Thats pretty much what I was wanting to hear. I have had nothing but issues myself, and have been using manual pan.
How much of a PITA was the "bit of doing"? I am ready to try anything.

 

[tombrown1]

Use servo tape and a well placed zip tie to attach it to the side of the roll cage. Get the ff servo. You'll figure out how to put it on. It's worth it.

Best,

tom

 

[tahoelight]

Your Av130 is having pan issues even without going through RSGS right? So, you still need to try a new servo.

 

[pmijoiu]

I have replaced the Hyperion servo with a Savox SH 1350 and managed to get some improvement. It is still not perfect but is good enough. I am using RSGS.