Hello there everybody!
My name is Sergio and i`m considering the fact of buying a quadcopter set at hobbyking.com
I used to enjoy nitro rc cars when i was younger, so i already have a few knowledge about these hobbys
My first idea, is to buy the following parts of an (ARTF) Idea Fly 4:
- http://hobbyking.com/hobbyking/stor...er_with_Motor_ESC_Flight_Controller_PNF_.html
(The quadcopter itself, running on brushless outrunner engines, with flight controller, gyroscope, accelerometer, barometer and GPS ready)
- http://hobbyking.com/hobbyking/stor..._Module_8ch_Receiver_Mode_2_v2_Firmware_.html
(The radio, a Turnigy 9ch. I read about it in some places, and got a nice impression. Seems an honest entry level radio, 2.4ghz and ****)
- http://hobbyking.com/hobbyking/store/__16529__Turnigy_2650mAh_3S_1C_LLF_Tx_Pack_Futaba_JR_.html
(The battery for the radio)
- http://hobbyking.com/hobbyking/store/__11946__Turnigy_nano_tech_2650mah_3S_35_70C_Lipo_Pack.html
(The battery for the copter)
- http://hobbyking.com/hobbyking/stor..._6_50W_6A_Balancer_Charger_w_accessories.html
(The charger)
The whole thing ended up on U$ 330...
=========================================================
The thing is, i did a quick research on the net, also reading a few forums, and got this 5 items set as a first attempt to fly.
Does the battery charger charges both batteries? (the radio and the copter one)
Do I need any adaptor for the batteries wire plugs?
Is there anything wrong with something i chose?
Something that won`t "fit" ??
Thaks for any help!
My name is Sergio and i`m considering the fact of buying a quadcopter set at hobbyking.com
I used to enjoy nitro rc cars when i was younger, so i already have a few knowledge about these hobbys
My first idea, is to buy the following parts of an (ARTF) Idea Fly 4:
- http://hobbyking.com/hobbyking/stor...er_with_Motor_ESC_Flight_Controller_PNF_.html
(The quadcopter itself, running on brushless outrunner engines, with flight controller, gyroscope, accelerometer, barometer and GPS ready)
- http://hobbyking.com/hobbyking/stor..._Module_8ch_Receiver_Mode_2_v2_Firmware_.html
(The radio, a Turnigy 9ch. I read about it in some places, and got a nice impression. Seems an honest entry level radio, 2.4ghz and ****)
- http://hobbyking.com/hobbyking/store/__16529__Turnigy_2650mAh_3S_1C_LLF_Tx_Pack_Futaba_JR_.html
(The battery for the radio)
- http://hobbyking.com/hobbyking/store/__11946__Turnigy_nano_tech_2650mah_3S_35_70C_Lipo_Pack.html
(The battery for the copter)
- http://hobbyking.com/hobbyking/stor..._6_50W_6A_Balancer_Charger_w_accessories.html
(The charger)
The whole thing ended up on U$ 330...
=========================================================
The thing is, i did a quick research on the net, also reading a few forums, and got this 5 items set as a first attempt to fly.
Does the battery charger charges both batteries? (the radio and the copter one)
Do I need any adaptor for the batteries wire plugs?
Is there anything wrong with something i chose?
Something that won`t "fit" ??
Thaks for any help!