My idea would buy a Phantom 3 Professional/Advanced or Phantom 4/Phantom 4 Pro/Adv
then buy a DJI HDMI module. https://www.amazon.com/DJI-HDMI-Output-Module-Phantom/dp/B013H9IRGY
how to
this maybe the easy way. If you want to go with better cameras you need a bigger drone then buy a hdmi...
I dont know what dji drone you flying but in the firmware there are condition which it defines as “emergencies” and if an “emergency” occurs the programming is designed to cut the motors. Some known “emergencies” are if there is a motor obstruction and the motor is unable to rotate freely the FC...
wow that heli is old as hell 10yrs or something?? You might be better trying source one from dragonfly or just buy a new one that similar spec to the x6 one. repairing motors is not worth the effort you could try though
yes we have one. Made by a japanese company it may work for your needs?
https://www.multicopter.co.jp/
basically a fishing line attached its a little dangerous
it wont get gps signal if the drone cant see the sky. If you flying in your garage it was probably in manual mode making it harder to fly if your just starting out.
the best way to check if your controller is ok and you have control is to either get a friend to hold it in the air start the...
Im not good with pixhawk but the best way is to upload a video here is youtube then post the link. Have you tried different props 2 blades vs the 3 blades it may be causing something that i cant see?
7.5kgs is a heavy payload for any drone to carry 6 miles.
ALTA X could carry it easy enough safely but i dont think it could make the distance even a full throttle. plus i wouldnt want to fly a big drone over people etc its just far to risky.
Even good fpv systems struggle after 6-7kms range...
set your RTH height point as max if possible most of those cheaper drones will come home but will attempt at the same height it was flying at so if was down at the bottom of the cliff and rth activated it would fly into the cliff.