Show what you filmed - Post Your Video Here

[gael]

Pixhawk ?

 

[fmkit]

a bit modified Naze32
the quad:

 

[gael]

Great i didn't know the follow me in this FC

 

[fmkit]

Naze32 has no follow me mode, in the bike video quad is flown freely while gimbal is tracking GPS tag placed in backpack. Naze32 does panning and calculates Tilt using its baro so there is no "follow me" . I tried to to keep video title short and typed "follow me" not because of active mode just because it looks like.

 

[tonyh0905]

Save Cancel
Mynydd Portref Wind Turbines near Bridgend in South Wales

 

[acarracena]

One Year Flying

 

[binlagin]

Epic Iris+ and Phantom flight!

 

[SleepyC]

Not aerial work.. but one of the "ground productions" my company Airheadmedia.com recently did.

Really cool place to eat and get a little swizzel on.

 

[mitmit]

Trailer for one of the latest motion picture we had fortune to participate.

cheers
Dimitri

 

[SamaraMedia]

Sweet! Nice Dimitri, always enjoy your work.

John

 

[mitmit]

Thanks for kind words John!

 

[SleepyC]

Dimitri that was amazing, and the color grading is awesome. What cameras were used? Again awesome work!!


Sent from my iPhone using Tapatalk

 

[mitmit]

thanks Stephen) aerials were shot on red, the rest on alexa's. there also were some aussies who did aerials on Bali.

 

[tonyh0905]

South Wales coast at Llantwit Major

 

[dazzab]

Just some practice flying with the DJI Inspire. Most of this is at 2x speed and some of it is reversed. Password is "tbsilo"

 

[fdproductions]

Provided media coverage of a race event for Global Time Attack at Buttonwillow Racetrack!

 

[fmkit]

very light quad w/soft gimbal

 

[patrickava3]

I have a phantom one (older version) and I have upgrade it to version 4:02. then I reinstall the Phantom, but now my controller is not working properly. I have this controller already recalibrated and sticks on the DJI NAZAM Assistant_2.20. after this stick calibration comes a text that says: After calibration, put all the TX sticks to their center position , and observe whether all the sliders shown in the software are in the middle position or not. If not, there is a problem with the TX owner´s manual to check / adjust the TX stick calibration ( for example, the Transmitter Calibration section in the advanced manual of PHANTOM ). Then click the ´view´ tab to check the center position deviation value, the value between -100 and 100 is allowed. (the left stick of the SR6 controller does not return to the center point). But I have already put the sticks in the middle.


((((for the update, I could put the left stick from the bottom to the middle so that the motors were running slightly harder (not flying) and when I put the left stick to the top the phantom will fly. ((((((after the update: i do the left stick to the middle but the motor does not running faster. and if I use the left stick to the top the motors run faster but increases the phantom not.

please tell me what to do?

 

[anaka]

hi people here it comes my latest edit from a web project on the Fogliano National Park done time ago

hope you enjoy the quality of anaka-1 aerial filming solution

 

[tonyh0905]

They are demolishing a local TV studio to build new housing, so I thought I would try out the new S-OSD, and get some video of the old place before it was completely gone!