stitch1615
Member
HK 2836 motors with Gemfan 1045 props
Q Brain 20
Naza Lite installed in a "water resistant" (not water tight or water proof) box on top of the cover.
GPS Puck mounted on top of that.
7 Chan HK Orange (Spektrum) RX ( *** Optional)
Gore Tex vent installed for the Bario.
Flown with a 2600 3S battery
3 great test and tune flights but has never been in the water.
(Yes, there are 4 cover screws)
My intent was to fly over and video the RC Boat racers but no one was particularly interested so,,, no longer was I.
Their motto is, "If it don't float, it ain't s,,,,,,". Hey wait a minute. It does float!
I have a 60T connector inside the box to complete the battery circuit after the cover and "tower" are secured.
I just use 2 pieces of scotch tape to secure the GPS puck lid.
It reduces the time the battery is burning while buttoning up.
$400 plus shipping.
Q Brain 20
Naza Lite installed in a "water resistant" (not water tight or water proof) box on top of the cover.
GPS Puck mounted on top of that.
7 Chan HK Orange (Spektrum) RX ( *** Optional)
Gore Tex vent installed for the Bario.
Flown with a 2600 3S battery
3 great test and tune flights but has never been in the water.
(Yes, there are 4 cover screws)
My intent was to fly over and video the RC Boat racers but no one was particularly interested so,,, no longer was I.
Their motto is, "If it don't float, it ain't s,,,,,,". Hey wait a minute. It does float!
I have a 60T connector inside the box to complete the battery circuit after the cover and "tower" are secured.
I just use 2 pieces of scotch tape to secure the GPS puck lid.
It reduces the time the battery is burning while buttoning up.
$400 plus shipping.